Home Uncategorized Bucket elevator?

Bucket elevator?

by admin

working principle of bucket elevator

the hopper scoops up the materials from the storage below. With the conveyor belt or chain lifting to the top, it turns down after bypassing the top wheel, & nbsp; The bucket elevator dumps the material into the receiving tank. The drive belt of bucket elevator with belt drive generally adopts rubber belt, which is installed on the lower or upper drive drum and the upper and lower change direction drum. Chain driven bucket elevator is generally equipped with two parallel transmission chains, with a pair of transmission sprockets on or below and a pair of reversing sprockets on or above. Bucket elevator is generally equipped with shell to prevent dust flying in bucket elevator

bucket elevator is a continuous conveying machine that uses a series of hoppers uniformly fixed on endless traction members to vertically lift materials. Bucket elevator uses a series of hoppers fixed on the traction chain or belt to transport bulk materials upward in the vertical or near vertical direction, which is divided into ring chain, plate chain and belt

Chinese name
bucket elevator
foreign name
bucket elevator
suitable for
lifting from low to high
advantages
large conveying capacity and high lifting height
parameters comply with
jb3926-85 vertical bucket elevator
Introduction
bucket elevator is suitable for lifting from low to high, After the supplied materials are put into the hopper through the vibrating table, the machine will automatically operate continuously and transport upward. The conveying speed can be adjusted according to the conveying capacity, and the lifting height can be selected as needed. The hopper is designed and manufactured by ourselves. PP non-toxic hopper makes this bucket elevator more widely used. All dimensions are designed and manufactured according to the actual needs. It is designed for supporting vertical packaging machine and computer metering machine. It is suitable for the lifting and feeding of food, medicine, chemical industrial products, screws, nuts and other products, The automatic stop and start of the machine can be controlled through the signal recognition of the packaging machine

13 pieces
bucket elevator

working principle
the hopper scoops up the materials from the storage below. As the conveyor belt or chain is lifted to the top, it turns down after bypassing the top wheel, and the bucket elevator dumps the materials into the receiving groove. The drive belt of bucket elevator with belt drive generally adopts rubber belt, which is installed on the lower or upper drive drum and the upper and lower change direction drum. Chain driven bucket elevator is generally equipped with two parallel transmission chains, with a pair of transmission sprockets on or below and a pair of reversing sprockets on or above. Bucket elevator is generally equipped with casing to prevent dust flying in bucket elevator

bucket elevator: it is suitable for lifting from low to high. After the supplied materials are put into the hopper through the vibrating table, the machine will transport them automatically and continuously

You may also like

Leave a Comment