generally, after the knife is installed, first align the gap between the two ends, not too large, and then slowly tighten the diagonal screws. Generally, it starts with the rotating surface. The knives are scissors type. Compare the bottom end.
remove the knife first. Then remove the knife. When replacing the cross cutting knife of the drum Slitter, first install the lower knife, put the lower knife straight and flat, then install the upper knife, and then adjust the gap between the knives until the paper is cut off. Shenzhen senmeigao Equipment Manufacturing Co., Ltd. specializes in manufacturing high-speed Web slitter. Business consultation and Negotiation Manager: Zhang Jiahui