Home Uncategorized What is the specific operation method of manual packer…

What is the specific operation method of manual packer…

by admin

1. Install the charged battery on the tail of the machine. When you insert the battery into the fixed slot of the tail, you hear a “click”, and then pull the battery to ensure that it will not loosen, which indicates that the installation is successful
2. There is a control panel on the right of the packer. There are two adjustment buttons on the control panel, one is the adjustment button for tension, the other is the adjustment button for fusion for 2-3 seconds. When the adjustment light flashes, press the “+” or “-” button on the panel to increase or decrease the corresponding setting value of the adjusted item, which is generally set at the height of 2-3 lights. For the adjustment of bonding time, it is best to extrude about 1mm melt at the bonding place of the packing belt, which is generally set at the height of 2-3 lamps. After the adjustment is completed, the setting will automatically enter the locking state within 3-5 seconds
3. Battery charging: connect the charger to the power supply and the green light is on for a long time, indicating that the charger is in standby mode. Insert the battery into the bottom of the charger, the green light flashes, and the battery begins to charge. When the green light is on for a long time, the charging is completed. Generally, the charging time is about 20 minutes. However, the first charge of the new battery requires 12-24 hours.

You may also like

Leave a Comment