Home Uncategorized What material is used for Red Bull beverage cans / cans?

What material is used for Red Bull beverage cans / cans?

by admin

Red Bull beverage cans are iron

there are two kinds of materials for making cans: aluminum and tinplate

the specific reasons are as follows:

1. The production cost of aluminum is low

2. As a recyclable material, it greatly improves the reuse rate

3. It greatly reduces the waste of materials and is more environmentally friendly

4. From the source of the material itself, aluminum has good ductility and is more suitable for the manufacture of cans

because the cost of steel cans is about 7 ‰ lower than that of aluminum cans, steel cans dominate the beverage packaging market in South America, but with the improvement of environmental awareness. Considering the recycling of resources, aluminum packaging materials will gradually replace steel. With the application of stretching technology in the production of spray cans, aluminum type aerosol cans will gradually occupy the market. p>

extended data:

related features of cans:

1. It is hygienic, will not rust, easy to open without auxiliary tools. After opening, the bottle cap is destructive, which can effectively prevent theft

2. It has the advantages of good cushioning, earthquake resistance, heat insulation, moisture-proof and chemical corrosion resistance. It is non-toxic, non absorbent, non dusting, peeling and scaling. It is increased, and the sealing performance is very good

3. Stainless steel balls are made according to different needs. They are resistant to high temperature, boiling and alcohol. The pattern design can adopt color printing, embossing and milling

4. The inner cushion adopts special glue dropping materials and advanced production technology, so that it has excellent tightness after sealing the bottle, and the cover surface has a larger plane, which makes the printing of various text mark patterns and bottle caps more beautiful, and also makes canned products more valuable

is made of tinplate
there are two kinds of materials for making cans: aluminum and tinplate
the consumption of aluminum metal materials used for packaging containers in the United States reached 1999200 tons in 1998, an increase of 2.24% over 1997, becoming the second largest consumer market, accounting for 21.6% of the annual aluminum consumption. In the United States, aluminum plates are always used in cans, and about 40% of aluminum plates are used in cans every year. About 14% of aluminum metal materials in Europe are used in beverage production. Due to the high recycling and reuse value of aluminum metal, a large number of aluminum materials have been turned to for environmental protection. 63% of cans produced in 1999 were made of aluminum, an increase of 2% over 1998. Compared with 1999, it increased by 9% in 2000, 66% in the UK in 1999 and 6% in 2000. Finland, Switzerland, Greece, Italy, Poland and other tank markets began to use 100% aluminum, 10% in Germany and about 30% in France, Belgium, Luxembourg and the Netherlands
since the cost of steel cans is about US $1000 lower than that of aluminum cans, steel cans dominate the beverage packaging market in South America. However, with the improvement of environmental awareness and the recycling of resources, aluminum packaging materials gradually replace steel. The adoption rate in Brazil is 65 per cent and will increase by 10 per cent in two years. In the field of spray cans, steel has always been the dominant position in the past. Since 2000, many products have been turned to aluminum, with a growth rate of 2% to 3%. With the application of stretching technology in the production of spray cans, aluminum type spray cans will gradually occupy the market.

made of nickel alloy

Aluminum

iron bar

You may also like

Leave a Comment